Weis GmbH Number ONE in Breaker Testing

you are here: Home arrow Products arrow SA100R arrow Specifications

Dienstag, 06 Januar 2009
Main Menu
Home
About us
Products
Contact
Download
Distributor
Search
Newsletter
Sitemap
Who's Online
PS 100 Power Supply
Newsletter

Please subscribe the newsletter, if you want to stay informed about our new products.






SA100R Specifications Switchgear Analyser Breaker Testing Print E-mail
INPUTS
Analogue:1 x Independently controlled trip (open) and close coil current inputs.
 1 x Linear / rotary resistive travel transducer input, will calculate all 3 phases. 3 extra with travel+ option.
 3 x User configurable 0 - 10V DC or 0 - 200mV DC inputs, selected via input sockets.
Analogue Accuracy:<0.5% of fullscale.
Digital:8 x Contact status inputs providing timing of up to 4 main contacts and 4 resistive contacts (dry contacts).
 2 x User configurable inputs for contact timing (24 - 250V DC).
Resistive Contact Range:15 - 10,000 ohms.
Digital Resolution:100µSec.
Connectors:4mm safety socket.
OUTPUTS 
Coil Operation:Solid state outputs for trip (open) and close.
Coil Peak Current:5 or 30A selectable via input sockets.
Coil Max. Voltage:400V peak.
dynamic Option Battery:3 x Isolated and floating 20A DC constant current battery sources for dynamic breaker timing.
Battery Characteristics:Charging time from fully discharged state 8 hours. Recharge time for a single discharge 100 seconds.
Battery Accuracy:±0.5%, 100ppm/°C
Battery Drive Capability:0.0 to 0.5 ohm load.
RECORDING 
Resolution:12 bit A/D (1:4096) and 10 kHz sampling rate.
Recording Time:Selectable up to 100 seconds.
Synchronisation:All inputs sampled simultaneously
Start trigger:Coil current or selectable on any analogue / digital input.
GENERAL SYSTEM 

12.1” TFT SVGA (800x600) “High-Bright” colour display (600cd). Removable USB Flash-Disk.

EIDE hard disk drive. VGA port for external screen. RS232, parallel printer, RJ45 network and 2xUSB ports.

256MB RAM. Windows™ Operating System. All standard Windows Centronics or USB printers supported.

Safety keyswitch to enable/disable coil operation and constant current battery operation. 2 x PS2 sockets.

REAL-TIME CLOCK 
Range:Time, date, leap year and day of the year with internal battery backup. 100mS resolution.
PROGRAMMING - SETTABLE PARAMETERS
User strings:Site name, breaker number, breaker type, line name, operator name and up to 30 user configurable.
Test times:Close, Open, Trip Free, Close-Open, Open Close, Open-Close-Open.
Coil operate times:Initial delay, trip coil “on-time”, close coil “on-time”, delay time between closing and opening, delay time between opening and closing.
Channels:

Analogue - Input name, fullscale value, units. Digital - Input name.

Datum points:2 sets of velocity calculation points on travel (speed) curve.
COMPUTED RESULTS

Up to a sequence of 3 operations detailing 3-phase information:

Peak coil current, operate times and operate time spread (main/resistive), on time, dead time, datum velocity, velocity at contact touch, acceleration, stroke, contact length (main/resistive), contact seperation, spring compression on vacuum contacts, travel overshoot, bounce time and rebound.

Acceleration and velocity:

Graphical trace derived for measured travel input with cursor measurement.

Parallel Contact (P.I.R.) Switching Resistors:

Graphical traces for each with cursor measurement. Measurement of up to 4 PIR's or 6 PIR's with travel+ option.

OPERATING VOLTAGES
Prime Power:100 to 370V DC, 90 to 264V AC auto-sensing via IEC power connection. Burden <60 VA.
ENVIRONMENTAL

Operating

Temperature:

-20ºC to +70ºC (-4ºF to +158ºF)
Humidity:0 to 97% RH non-condensing.
Isolation:2kV rms for 1 minute (channel to channel, channel to earth).

Surge Withstand

Transient:

To IEC 801-5. 1.2/50mS.

Common Mode: Severity level class 4.

Series Mode: Severity level class 3.

Fast Transient Burst:To IEC 801-4 level 3.
RFI Immunity:To IEC801-3 level 3. 10V/m 26-1000MHz.
Emissions:To EN50081-1: 1992.
MECHANICAL DETAILS
Enclosure:6U steel enclosure suitable for Euro 19” wide rack mounting or free standing (tabletop).
Ventilation:Fan assisted.
Weight:<9kg. dynamic version adds <1kg.
Optional Carry Case:Reinforced aluminium with wheels on one end, 710mm(W) x 480mm(H) x 370mm(D).
DUE TO CONTINUING DEVELOPMENT AND IMPROVEMENTS WEIS RESERVES THE RIGHT TO CHANGE THIS SPECIFICATION WITHOUT NOTICE

Windows is a trademark for Microsoft Inc.