|
RT100 Specifications RelayTester Secondary Injection Relay Test Set |
|
|
| OUTPUTS | | AC Current: | 0 to 10A range with the following characteristics:- | | | No-Load Voltage (min.): 80V Full-Load Voltage (min.): 70V Full-Load Current (max.): 10A Time: 2 hours Safety: Output transformer equipped with built-in temperature protection. Primary side protected by miniature circuit breakers. | 
| 0 to 25A range with the following characteristics:- No-Load Voltage (min.): 24V Full-Load Voltage (min.): 20V Full-Load Current (max.): 25A Time: 1 hour Safety: Output transformer equipped with built-in temperature protection. Primary side protected by miniature circuit breakers. | | | 0 to 50A (short term max. 200A peak) range with the following characteristics:- No-Load Voltage (min.): 10V Full-Load Voltage (min.): 2V Full-Load Current (max.): 50A Time: 1.5 minutes Safety: Output transformer equipped with built-in temperature protection. Primary side protected by miniature circuit breakers. | AC/DC Voltage: 0 to 240V AC rated at 2A for 1 hour. 0 to 300V DC rated at 2A for 1 hour. Auxiliary Voltage: 240V AC rated at 0.5A. 240V AC rated at 0.5A. 110V DC rated at 0.5A, 110V AC rated at 0.5A & 30V DC rated at 1A. If the 110V DC & AC fixed outputs are used simultaneously the rating is 0.2A each. Safety (Voltage): Re-triggerable fuses used in all voltage outputs | | INPUTS | | | Digital: | 2 x wet contacts and 1 x dry contact. | | | | | TIMER | | | Range: | 0.000 to 999.999 seconds, auto-ranging. | | Resolution: | 1mSec. | | Max. Testing Time: | 999.999 seconds. | | MEASUREMENTS | | | Readout: | Output parameters are displayed on a large backlit LCD display. Auto-ranging if output is less than 10% of range. | | Measured Quantities: | AC current output. Timer. | | Accuracy: | ±0.5% of metering. | | AC Measurement: | True RMS. | | Set of Resistors: | 0.5Ω (10A max.), 1Ω (5A max.), 25Ω (2A max.), 100Ω (0.7A max.) & 500Ω (0.3A max.). | | OPERATING VOLTAGES | |  | | Prime Power: | 230 or 115V AC ±15%, 50/60Hz. | | ENVIRONMENTAL | | Operating Temperature: | -20ºC to +70ºC | Storage Temperature: | -40ºC to +70ºC | | MECHANICAL DETAILS | | | | Weight: | 10kg. | | Carry Case: | Reinforced aluminium, 13.5” x 9.5” x 6” (340mm x 240mm x 150mm). | | | | | DUE TO CONTINUING DEVELOPMENT AND IMPROVEMENTS WEIS RESERVES THE RIGHT TO CHANGE THIS SPECIFICATION WITHOUT NOTICE |
|
